calipered
3D-printable parts · STL + 3MF

Printable parts that fit the first time.

Digital files you print yourself, starting with cosplay hardware: magnet connectors, strap buckles and helmet fan mounts.

Every Calipered design is measured with a caliper, checked by script, and printed on our own Bambu Lab P2S Combo before it's released. Each download says what we printed it on and the gap every fit was designed with.

Drawing of the Calipered tolerance coupon: a 112 by 14 mm stepped plate with 8 holes from Ø8.10 to Ø9.00 mm, and an Ø8 mm test pin.TOP VIEWØ8.10Ø8.20Ø8.30Ø8.40Ø8.50Ø8.60Ø8.80Ø9.0014FRONT VIEW11237.2+0.6 PER STEPPINØ812
FREE-TOL-001 · tolerance coupondimensions in mm · clearance 0.05–0.50 per side
The process

How a file earns the name

Five steps, in this order, for every design. A file that fails one goes back a step.

  1. 01

    Measure

    The real part it has to fit goes under a digital caliper first. Advertised sizes are often a few tenths off, and a few tenths is the difference between a snug fit and a part that won't go in.Key sizes are recorded in the product file before modelling starts.

  2. 02

    Model

    Designed in Blender in millimetres, with a clearance gap on every surface that touches another part, and laid out to print without supports wherever the shape allows.Overhangs kept under 45° · gaps published per side

  3. 03

    Check

    A script exports the model and checks it before any plastic is used: holes in the mesh, walls too thin to print, parts starting in mid-air, and whether it fits a small printer's bed.Walls 1.2 mm or more · fits a 180×180 mm bed

  4. 04

    Print

    A draft, then fit tests for anything that slides, clicks or holds a magnet, then a final print at the settings buyers will use. Three key dimensions get measured again.Each within ±0.3 mm of the drawing · one unedited photo of the real print

  5. 05

    Package

    Only the exact files that passed the print go out: STL parts already oriented, a 3MF plate ready to slice, and a short README with the settings we used.Change the model and it goes back to step 03

Parts list

On the bench

Nothing is for sale yet. Designs appear here once they reach the test-print stage.

Part no.PartBuilt to fitStatus
FREE-TOL-001Tolerance Test CouponFREEYour printer: shows the clearance it really needs.Ready to test print
Clearance chart

The gaps we design with

Fitmm per sideUsed for
Press fit0.00–0.05Parts pushed together for good: magnets, pins, inserts
Snug fit0.10–0.15Firm hand-fit you can still pull apart
Sliding fit0.20–0.25Lids, drawers and webbing slots that should move
Rotating joint0.25–0.30Hinges and pivots
Lid or box0.20–0.30Lids that drop onto a box
Threads (radial)0.25–0.40Printed threads
Print-in-place (XY)0.30–0.40Moving parts printed already assembled (side to side)
Print-in-place (Z)0.30–0.40Moving parts printed already assembled (layer to layer)
Where to get them

Shops

Free models go up first. Paid files follow once their final print passes.

PrintablesFree modelsOpening soon
MakerWorldFree modelsOpening soon
EtsyTested paid filesOpening soon
Cults3DTested paid filesOpening soon
MyMiniFactoryTested paid filesOpening soon